HOUSE, WENTWORTH ESTATE

Moulds, Beads and Accessories

Moulds
Beads
Door Accessories

Your custom made Longden door wouldn’t be complete without the addition of appropriate moulds and accessories. As you discus your dream door with our team be sure to ask about how the design of your door could be enhanced to ensure ultimate luxury.

Moulds

Door moulds are the visual characteristics of a panelled door that are also determined by any profile mould applied to panel edges of framings.

Ovolo

Stepped Ovolo

Square Shoulder

Lamb’s Tongue

Duplex

Splay

Stepped Rebate

Applied Mouldings

Applied mouldings can be added to provide extra details to panels either flat or raised and fielded. There are two types of applied mouldings bolection and bed. Both can be used in conjunction with square profile moulds. Longden can also replicate existing mouldings where there is a construction requirement.

Bolection
Moulds

BL1

For internal or external use

BL2

For internal or external use

BL3

For internal or external use

BL4

For internal or external use

BL5

For internal or external use

BL6

For internal or external use

BL7

For internal or external use

BL8

For internal or external use

BL9

For internal or external use

BL10

For internal or external use

BL11

For internal or external use

Bolection Moulds
for FD60 Glazed doors

BL8

For internal or external use

BL9

For internal or external use

BL10

For internal or external use

Bed Moulds

BM1

BM2

BM3

BM4

BM5

BM6

BM7

BM8

BM9

BM10

BM11

BM12

BM13

BM14a

BM14b

BM15

BM16a

BM16b

Panel Beads

Three standard panel bead designs are offered. Each can be applied to flat surfaces to create intricate detail.

PB1

PB2

PB3

Example of a PB2 panel bead on a Sheraton flat panel with Duplex profile moudlings.

Example of a PB1 panel bead on a Sheraton flat panel with BM1 bed mouldings.

Example of a PB3 panel bead on a Sheraton flat panel with BM15 bed mouldings.

Door Accessories

Intumescent Packs

To help you meet performance requirements for fire and smoke, Longden can provide intumescent packs containing all the necessary seals for fitting within door leaf edges or frames. The seals are colour matched to the chosen timber and are available as fire seals or where smoke protection is also required, combined fire and smoke seals.

Door Protection

Longden can provide durable door protection sheets to help protect your door or doorset against on-site damage. Our door protection sheets meet the Loss Prevention Certification Board (LPCB) quality standards, are chemical resistant, waterproof and can be supplied for one or both sides of the door.

Finishes

Virtually any form of finish can be applied to Longden timber doors and doorsets, including:

Primed for Paint
Clear Varnish
Stain
Wax
Oil Finish

all of which can be factory applied. Please note that with clear finishes, variations in colour and grain of timber may occur as timber is a natural material. Doors ordered for on-site painting can be supplied pre-primed.

Standard door finishes:

2 coats primer. Standard consists of two water-based primer, de-nib between coats.
Topcoats added on-site by brush or spray and should be of a quality suitable to the location either internal or external.
2 coats acid catalyst lacquer. This has a 30% – 40% satin sheen as standard. Alternatively, matt 10% – 20% or gloss 50% – 70% can be supplied.
Tinted lacquers are also available.

Note: For the best results, Longden recommends the use of a minimum of 20% matt lacquer to complement your doorset.

Waterborne microporous:

This is the standard finish used on external doors and doorsets.

Dados, Skirting, Architrave and Plinth Blocks

Below are our standard profiles for dado mouldings, skirtings, architraves, and plinth blocks. However, we are usually able to match existing profiles or bespoke profiles that may be required.