Moulds
The visual characteristics of a panelled door are also determined by any profile mould applied to panel edges of framings.
Ovolo
Stepped Ovolo
Square Shoulder
Lamb’s Tongue
Duplex
Splay
Stepped Rebate
Applied Mouldings
Applied mouldings can be added to provide extra details to panels either flat or raised and fielded.
There are two types of applied mouldings bolection and bed. Both can be used in conjunction with square profile moulds. Longden can also replicate existing mouldings where there is a construction requirement.
Bolection
Moulds
BL1
For internal or external use
BL2
For internal or external use
BL3
For internal use only
BL4
For internal use only
BL5
For internal or external use
BL6
For internal or external use
BL7
For internal or external use
BL8
For internal or external use
BL9
For internal or external use
BL10
For internal or external use
BL11
For internal or external use
Bolection Moulds
for FD60 Glazed doors
BL8
For internal or external use
BL9
For internal or external use
BL10
For internal or external use
Bed Moulds
BM1
BM2
BM3
BM4
BM5
BM6
BM7
BM8
BM9
BM10
BM11
BM12
BM13
BM14a
BM14b
BM15
BM16a
BM16b
Panel Beads
Three standard panel bead designs are offered. Each can be applied to flat surfaces to create intricate detail.
PB1
PB2
PB3
Example of a PB2 panel bead on a Sheraton flat panel with Duplex profile moudlings.
Example of a PB1 panel bead on a Sheraton flat panel with BM1 bed mouldings.
Example of a PB3 panel bead on a Sheraton flat panel with BM15 bed mouldings.
Accessories
Intumescent Packs
To help you meet performance requirements for fire and smoke, Longden can provide intumescent packs containing all the necessary seals for fitting within door leaf edges or frames.
The seals are colour matched to the chosen timber and are available as fire seals or where smoke protection is also required, combined fire and smoke seals.
Door Protection
Longden can provide durable door protection sheets to help protect your door or doorset against on-site damage. Our door protection sheets meet the Loss Prevention Certification Board (LPCB) quality standards, are chemical resistant, waterproof and can be supplied for one or both sides of the door.
Finishes
Virtually any form of finish can be applied to Longden timber doors and doorsets, including:
- Primed for Paint
- Clear Varnish
- Stain
- Wax
- Oil Finish
all of which can be factory applied.
Please note that with clear finishes, variations in colour and grain of timber may occur as timber is a natural material. Doors ordered for on-site painting can be supplied pre-primed.
Standard door finishes:
- 2 coats primer. Standard consists of two water-based primer, de-nib between coats.
- Topcoats added on-site by brush or spray and should be of a quality suitable to the location either internal or external.
- 2 coats acid catalyst lacquer. This has a 30% – 40% satin sheen as standard. Alternatively, matt 10% – 20% or gloss 50% – 70% can be supplied.
- Tinted lacquers are also available.
Note: For the best results, Longden recommends the use of a minimum of 20% matt lacquer to complement your doorset.
Waterborne
microporous:
This is the standard finish used on external doors and doorsets.
Dados, Skirting, Architrave and Plinth Blocks
Below are our standard profiles for dado mouldings, skirtings, architraves, and plinth blocks. However, we are usually able to match existing profiles or bespoke profiles that may be required.
Dados mouldings
DD1
DD2
DD3
DD4
Skirtings
SKRT1
SKRT2
SKRT3
SKRT4
SKRT5
SKRT6
SKRT7
SKRT9
SKRT9
Architraves
ARC1
ARC2
ARC3
ARC4
ARC5
ARC6
ARC7
ARC8
ARC9
Plinth blocks
PBK1
PBK2
PBK3
PBK4
